
Bottom Paint & Antifouling Services in Vancouver
Strong Marine Services provides bottom-paint and antifouling work for vessels in North Vancouver, Vancouver and the Lower Mainland. The goal is straightforward: prepare the hull properly, choose a coating system that suits the existing substrate and service conditions, and apply it in accordance with the product requirements.
Assessment Before Coating
Before new antifouling goes on, we review the condition of the existing bottom paint, look for loose or failing material, and consider compatibility with the coating already on the hull. If the existing system is in poor condition or too heavily built up, removal or additional preparation may be required before recoating.
Surface Preparation
Good antifouling performance starts with surface preparation. Depending on the condition of the hull, preparation may include cleaning, sanding, removal of loose coatings and localized repair work. Where the existing antifouling needs to be stripped back, see our antifouling removal service.
Antifouling Application
We work with established marine coating systems and select the application approach around the vessel, existing coating and intended use. The number of coats, launch window and other details are based on the product requirements and the agreed scope of work.
Antifouling Systems We Work With
Depending on the hull material, operating profile and existing coating system, we work with products including Hempel Olympic 7660C, Jotun SeaForce 200 AV and International Interspeed 640.
Olympic 7660C is a conventional tin-free ablative antifouling with a self-renewing surface. SeaForce 200 AV is a self-polishing ion-exchange antifouling intended for professional underwater-hull systems, including approved systems on aluminum and carbon steel. Interspeed 640 is a TBT-free polishing antifouling used on commercial steel hulls. The correct choice depends on substrate, vessel activity, idle periods, service interval, existing paint and the complete primer/tie-coat specification.
For more detail, see our guide to Hempel Olympic 7660C, Jotun SeaForce 200 AV and Interspeed 640.
Hempel Silic One Fouling-Release System
Strong Marine Services is an approved applicator of Hempel’s Silic One fouling-release system. Silic One is a biocide-free, silicone-based below-waterline coating that Hempel recommends for aluminum, fiberglass, steel and plywood boats. It is an especially strong option for aluminum boats and one of our favourite systems for suitable propellers, running gear and drive legs.
Related Hull Repairs
If surface preparation exposes fiberglass or gelcoat damage, we can review that work before coating continues. Related services include cosmetic fiberglass repair, structural fiberglass repair and gelcoat repair.
Learn More About Coating Performance
For a deeper explanation of adhesion, compatibility and preparation problems, see our guide to why marine coatings fail.
Request an Estimate
For bottom paint, antifouling or Silic One work, send us the vessel size, hull material, current location, existing coating if known, and any photos that help show the hull condition. Call 778-939-9405 or use our contact form to discuss the project.
